Lmsensors
Jump to navigation
Jump to search
Packages[edit]
Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-f/Unpacked/Failed-cfg/Half-inst/t-aWait/T-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description +++-===========================-===========================-====================================================================== ii libsensors3 1:2.10.5-3ubuntu1 library to read temperature/voltage/fan sensors ii libsensors4 1:3.0.0-4ubuntu1 library to read temperature/voltage/fan sensors ii lm-sensors 1:3.0.0-4ubuntu1 utilities to read temperature/voltage/fan sensors
Config files[edit]
- /etc/sensors3.conf
- /etc/modules
Had to run the "sensors-detect" script to figure out which modules I need to add to /etc/modules. After the upgrade, I have two more temperatures that I could be graphing if I want. I probably should be graphing the fan rpm as well.
After the upgrade, this is the output of sensors:
rday@weasel:~/bin$ sensors k8temp-pci-00c3 Adapter: PCI adapter Core0 Temp: +31.0°C Core1 Temp: +30.0°C w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.37 V (min = +1.94 V, max = +1.94 V) +12V: +12.77 V (min = +10.82 V, max = +13.19 V) +3.3V: +3.20 V (min = +3.14 V, max = +3.47 V) +5V: +5.01 V (min = +4.75 V, max = +5.25 V) -12V: -11.95 V (min = -10.80 V, max = -13.18 V) V5SB: +5.05 V (min = +4.76 V, max = +5.24 V) VBat: +3.01 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 5113 RPM, div = 2) CPU Fan: 3125 RPM (min = -1 RPM, div = 8) fan3: 5400 RPM (min = 112500 RPM, div = 2) M/B Temp: +33.0°C (high = +1.0°C, hyst = -120.0°C) sensor = thermistor CPU Temp: +35.5°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor temp3: +18.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode cpu0_vid: +0.000 V beep_enable:enabled