Fix broken pressure sensor hose on washer

Maytag washer troubleshooting

• model and serial number

• I started a smallish load on the normal setting and it said it would take 59 minutes.
• When the timer showed 1:06 remaining in the cycle, it was about one third full of water. It should never fill that high.
• About 5 minutes later, it was half full of water and showed error code E1 F8 and there was water leaking from the bottom of the washer like it had overflowed..

• I told it to do a "drain and spin" cycle and it showed 17 minutes left
• It spent a long time in the "sensing" state. Maybe 10 minutes
• At 12 minutes remaining in the cycle, it is slowly spinning, but ramping up.

Washer manual is here: http://www.maytag.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%20W10441130.pdf

Awesome video detailing fix is here: https://www.youtube.com/watch?v=maAwy7w74FA Maytag Maxima steam Washer has F8 & E1 error code - Pressure sensor & no water detected MHW4200BW

Replacement part for the pressure sensor hose: W10525781

• the damage on our hose was from wear on the spinning drum, just like in the video