Difference between revisions of "Fix broken pressure sensor hose on washer"
From Finninday
(→Now fix it) |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 9: | Line 9: | ||
* It spent a long time in the "sensing" state. Maybe 10 minutes | * It spent a long time in the "sensing" state. Maybe 10 minutes | ||
* At 12 minutes remaining in the cycle, it is slowly spinning, but ramping up. | * At 12 minutes remaining in the cycle, it is slowly spinning, but ramping up. | ||
| + | * load comes out damp but not soaking, and not really cleaned | ||
| − | Washer manual is here: | + | ===Now fix it=== |
| + | * Washer manual is here: | ||
http://www.maytag.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%20W10441130.pdf | http://www.maytag.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%20W10441130.pdf | ||
| − | Awesome video detailing fix is here: https://www.youtube.com/watch?v=maAwy7w74FA | + | * Awesome video detailing fix is here: [https://www.youtube.com/watch?v=maAwy7w74FA Maytag Maxima steam Washer has F8 & E1 error code - Pressure sensor & no water detected MHW4200BW] |
| − | Maytag Maxima steam Washer has F8 & E1 error code - Pressure sensor & no water detected MHW4200BW | + | |
| + | * Replacement part for the pressure sensor hose: W10525781 | ||
| − | + | * buy the replacement part from here https://www.google.com/maps/place/Reliable+Parts+Inc/@45.477366,-122.544799,15z/data=!4m2!3m1!1s0x0:0xc6e61d08e4b0ce34 for $11 | |
* the damage on our hose was from wearing against the spinning drum, just like in the video (notice the bandaids from moving the sharp and heavy sheet metal covers on the washer) | * the damage on our hose was from wearing against the spinning drum, just like in the video (notice the bandaids from moving the sharp and heavy sheet metal covers on the washer) | ||
Latest revision as of 20:59, 22 November 2014
Maytag washer model MHW4200BW troubleshooting
- model and serial number
- I started a smallish load on the normal setting and it said it would take 59 minutes.
- When the timer showed 1:06 remaining in the cycle, it was about one third full of water. It should never fill that high.
- About 5 minutes later, it was half full of water and showed error code E1 F8 and there was water leaking from the bottom of the washer like it had overflowed..
- I told it to do a "drain and spin" cycle and it showed 17 minutes left
- It spent a long time in the "sensing" state. Maybe 10 minutes
- At 12 minutes remaining in the cycle, it is slowly spinning, but ramping up.
- load comes out damp but not soaking, and not really cleaned
Now fix it
- Washer manual is here:
http://www.maytag.com/digitalassets/MLPDF/Use%20and%20Care%20Guide%20-%20W10441130.pdf
- Awesome video detailing fix is here: Maytag Maxima steam Washer has F8 & E1 error code - Pressure sensor & no water detected MHW4200BW
- Replacement part for the pressure sensor hose: W10525781
- buy the replacement part from here https://www.google.com/maps/place/Reliable+Parts+Inc/@45.477366,-122.544799,15z/data=!4m2!3m1!1s0x0:0xc6e61d08e4b0ce34 for $11
- the damage on our hose was from wearing against the spinning drum, just like in the video (notice the bandaids from moving the sharp and heavy sheet metal covers on the washer)
- after replacing the pressure sensor hose, and adding an extra cable tie to prevent this problem again, the washer works like normal.
