Difference between revisions of "Xymon custom graph config"

From Finninday
Jump to: navigation, search
(→‎launch the script with hobbit)
Line 1: Line 1:
 
===Prerequisites===
 
===Prerequisites===
−
Make sure the client has xymon and xymon-client installed:
+
Make sure the client has xymon-client installed:
 
<pre>
 
<pre>
 
root@merkli:/var/lib/hobbit# dpkg -l "*xymon*"
 
root@merkli:/var/lib/hobbit# dpkg -l "*xymon*"
Line 13: Line 13:
 
</pre>
 
</pre>
  
 +
I found that it was necessary to run
 +
<pre>
 +
dpkg-reconfigure xymon-client
 +
</pre>
 +
in order to tell the client how to contact the server.
 
===collect the data with a script===
 
===collect the data with a script===
 
hobbit client:/usr/lib/hobbit/client/ext/cputemp:
 
hobbit client:/usr/lib/hobbit/client/ext/cputemp:

Revision as of 01:41, 22 August 2012

Prerequisites

Make sure the client has xymon-client installed: 

root@merkli:/var/lib/hobbit# dpkg -l "*xymon*"
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name             Version          Description
+++-================-================-================================================
ii  xymon            4.3.0~beta2.dfsg monitoring system for systems, networks and appl
ii  xymon-client     4.3.0~beta2.dfsg client for the Xymon network monitor
un  xymon-plugins    <none>           (no description available)

I found that it was necessary to run 

dpkg-reconfigure xymon-client

in order to tell the client how to contact the server.

collect the data with a script

hobbit client:/usr/lib/hobbit/client/ext/cputemp: <source lang="bash">

  1. !/bin/sh
  1. /usr/bin/sensors -f | grep "CPU Temp" | awk '{print $1 $2 $3}' |
  2. awk {'sub("\+", ""); sub("°F", ""); print }' > /tmp/cputemp.txt
  3. /usr/bin/sensors -f | grep -i temp | grep -v k8temp|
  4. awk '{ sub("°F", ""); sub("\+", ""); sub("/", ""); sub(" +", ""); sub("\(.*$", ""); print}'
  5. > /tmp/cputemp.txt

RAWTEMP=`nvidia-smi -a | grep Temperature | sed -e "s/.*.://g" -e "s/C//g"` FGPUTEMP=$((${RAWTEMP:-0}*9/5+32)) echo "temp1:$FGPUTEMP" > /tmp/cputemp.txt

/usr/bin/sensors -f | grep Temp | grep -v k8temp | awk '{sub(".F.*$", ""); sub(" +",""); sub("+",""); print}' >> /tmp/cputemp.txt

RESULT=`grep Core0Temp /tmp/cputemp.txt | awk '{ FS=":"; print int($2) }'`; COLOR=green if test "$RESULT" -gt 120 then COLOR=red fi if test "$RESULT" -lt 70 then COLOR=red fi

$BB $BBDISP "status $MACHINE.cputemp $COLOR `date`

`cat /tmp/cputemp.txt` "

exit 0 </source>

  • you can run the script from the command line to test it

This is the expected output: 

root@merkli:/usr/lib/hobbit/client/ext# ./cputemp 
./cputemp: 24: status .cputemp green Thu Jul 21 10:23:23 PDT 2011

temp1:95.0
Core0Temp: 
Core1Temp: 
: not found

This particular script creates a temp file, so you can look at the timestamp on that to see if it is running: <source lang=bash> root@merkli:/usr/lib/hobbit/client/ext# ls -l /tmp/cputemp.txt -rw-r--r-- 1 hobbit hobbit 35 2011-07-21 10:26 /tmp/cputemp.txt </source> 

root@merkli:/usr/lib/hobbit/client/ext# cat /tmp/cputemp.txt 
temp1:95.0
Core0Temp: 
Core1Temp:

launch the script with hobbit

running the script on the hobbit server:/usr/lib/hobbit/server/etc/hobbitlaunch.cfg: 

[cputemp]
    ENVFILE /usr/lib/hobbit/client/etc/hobbitclient.cfg
    CMD /usr/lib/hobbit/client/ext/cputemp
    INTERVAL 5m

running the script on the hobbit client:/usr/lib/hobbit/client/etc/hobbitlaunch.cfg

  • wait for five minutes and then you should see the data in the web interface, but not the graph

collect the data in an RRD

From here on out, the configuration should all be on the server and not the client, since the RRD is stored on the server and the graphs are generated from that.

But what gets transferred between the client and server? The script output or the rrd file? My guess is that just the script output is transferred and the rrd is first constructed on the server.

hobbit server:/usr/lib/hobbit/server/etc/hobbitserver.cfg 

TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,
vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,
citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,
JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,
snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,
nparts,cputemp=ncv,heater=ncv"

NCV_cputemp="temp1:GAUGE,Core0Temp:GAUGE,Core1Temp:GAUGE"
  • restart hobbit after making these changes
  • you can verify the RRD:

hobbit server:/var/lib/hobbit/rrd/localhost/cputemp.rrd 

root@weasel:/var/lib/hobbit/rrd/localhost# rrdtool info ./cputemp.rrd 
filename = "./cputemp.rrd"
rrd_version = "0003"
step = 300
last_update = 1311266629
header_size = 2320
ds[temp1].index = 0
ds[temp1].type = "GAUGE"
ds[temp1].minimal_heartbeat = 600
ds[temp1].min = NaN
ds[temp1].max = NaN
ds[temp1].last_ds = "131"
ds[temp1].value = 2.9999000000e+04
ds[temp1].unknown_sec = 0

root@weasel:/var/lib/hobbit/rrd/localhost# ls -lt cputemp.rrd 
-rw-r--r-- 1 hobbit hobbit 57616 2011-07-21 09:43 cputemp.rrd

The timestamp on the file should be less than 5 minutes old and the data inside should correspond to the output of the script.

create a graph definition

hobbit server:/usr/lib/hobbit/server/etc/hobbitgraph.cfg: <syntaxhighlight lang=ini> [cputemp] 

   TITLE CPU Temperature
   YAXIS Degrees Fahrenheit
   DEF:temp1=cputemp.rrd:temp1:AVERAGE
   DEF:Core0Temp=cputemp.rrd:Core0Temp:AVERAGE
   DEF:Core1Temp=cputemp.rrd:Core1Temp:AVERAGE
   LINE2:temp1#@COLOR@:temp1
   LINE2:Core0Temp#@COLOR@:Core0Temp
   LINE2:Core1Temp#@COLOR@:Core1Temp\n

</syntaxhighlight>

troubleshooting

If a graph is not appearing, you can view source on the page with the missing graph and click on the IMG link that it is trying to display. But often that won't reveal anything useful.

Hobbit-graph-error.png


It is difficult to manually run /usr/lib/hobbit/cgi-bin/hobbitgraph.sh with the parameters from the web page to see what the error is. hobbitgraph.sh is a shell wrapper around a binary called /usr/lib/hobbit/server/bin/hobbitgraph.cgi. 

#!/bin/sh

# This is the Hobbit CGI script interface to hobbitgraph.cgi
#
# Install this script in your webservers' cgi-bin directory

. /usr/lib/hobbit/server/etc/hobbitcgi.cfg
 exec /usr/lib/hobbit/server/bin/hobbitgraph.cgi $CGI_HOBBITGRAPH_OPTS

Failing URL: 

"/hobbit-cgi/hobbitgraph.sh?host=merkli&service=ncv:cputemp&graph_width=576&graph_height=120&disp=merkli&nostale&color=green&graph_start=1311105181&graph_end=1311277981&graph=hourly&action=view"

Looking at the environment variables as hobbitgraph.sh runs, I see this on a working query: 

REQUEST_URI=/hobbit-cgi/hobbitgraph.sh?host=localhost&service=ncv:cputemp&graph_width=576&graph_height=120&disp=localhost&nostale& 
color=green&graph_start=1311116740&graph_end=1311289540&graph=hourly&action=view

QUERY_STRING=host=localhost&service=ncv:cputemp&graph_width=576&graph_height=120&disp=localhost&nostale&color=green&
graph_start=1311116862&graph_end=1311289662&graph=hourly&action=view

And this for a failing query: 

REQUEST_URI=/hobbit-cgi/hobbitgraph.sh?host=merkli&service=ncv:cputemp&graph_width=576&graph_height=120&disp=merkli&nostale&color=green&
graph_start=1311116888&graph_end=1311289688&graph=hourly&action=view

QUERY_STRING=host=merkli&service=ncv:cputemp&graph_width=576&graph_height=120&disp=merkli&nostale&color=green&graph_start=1311117131&
graph_end=1311289931&graph=hourly&action=view

manually generating a graph

In order to force a graphing error into view, you can manually attempt to generate the graph outside of hobbit, but using the same configuration and rrd that hobbit is using.

  • locate the rrd 
/var/lib/hobbit/rrd/merkli/cputemp.rrd
  • locate the existing graph config 
/usr/lib/hobbit/server/etc/hobbitgraph.cfg

[cputemp]
    TITLE CPU Temperature
    YAXIS Degrees Fahrenheit
    DEF:temp1=cputemp.rrd:temp1:AVERAGE
    DEF:Core0Temp=cputemp.rrd:Core0Temp:AVERAGE
    DEF:Core1Temp=cputemp.rrd:Core1Temp:AVERAGE
    LINE2:temp1#@COLOR@:temp1
    LINE2:Core0Temp#@COLOR@:Core0Temp
    LINE2:Core1Temp#@COLOR@:Core1Temp\n
  • cook up a corresponding graph command 
 $period = `date --date="7 days ago" +%s`;
 cp /var/lib/hobbit/rrd/merkli/cputemp.rrd /tmp/cputemp.rrd
 rrdtool graph /tmp/output.png --width 300 --start $period -v "Degrees Fahrenheit"  \
 DEF:temp1=/tmp/cputemp.rrd:temp1:AVERAGE \
 DEF:Core0Temp=/tmp/cputemp.rrd:Core0Temp:AVERAGE \
 DEF:Core1Temp=/tmp/cputemp.rrd:Core1Temp:AVERAGE \
 LINE2:temp1#FF0000:temp1 \
 LINE2:Core0Temp#00FF00:Core0Temp \
 LINE2:Core1Temp#0000FF:Core1Temp
  • the errors should be much more helpful now 
root@weasel:/var/www/temp# rrdtool graph /tmp/output.png --width 300 --start 1311615323 -v "Degrees Fahrenheit"   DEF:temp1=/tmp
/cputemp.rrd:temp1:AVERAGE  DEF:Core0Temp=/tmp/cputemp.rrd:Core0Temp:AVERAGE  DEF:Core1Temp=/tmp/cputemp.rrd:Core1Temp:AVERAGE  
LINE2:temp1#FF0000:temp1  LINE2:Core0Temp#00FF00:Core0Temp
ERROR: No DS called 'Core0Temp' in '/tmp/cputemp.rrd'

a graph appears, but there is no data

The script seems to be generating correct output, the rrd file is accumulating data, and the graph is appears on the custom graph page, but there is no data on the graph.

server:/var/log/hobbit/rrd-status.log contains this: 

2011-08-01 11:09:59 RRD error updating /var/lib/hobbit/rrd/merkli/cputemp.rrd from 10.0.0.14: 
/var/lib/hobbit/rrd/merkli/cputemp.rrd: found extra data on update argument: 89:89

rrdtool info tells me that the data from the script is unparseable: 

root@weasel:/var/lib/hobbit/rrd/merkli# pwd
/var/lib/hobbit/rrd/merkli
root@weasel:/var/lib/hobbit/rrd/merkli# rrdtool info cputemp.rrd
filename = "cputemp.rrd"
rrd_version = "0003"
step = 300
last_update = 1312221286
header_size = 2320
ds[temp1].index = 0
ds[temp1].type = "GAUGE"
ds[temp1].minimal_heartbeat = 600
ds[temp1].min = NaN
ds[temp1].max = NaN
ds[temp1].last_ds = "U"
ds[temp1].value = 0.0000000000e+00
ds[temp1].unknown_sec = 286

The entry of interest is ds[temp1].last_ds = "U" That should be a Fahrenheit temperature instead of U.

The script generates a floating point temperature. In case that is the problem, I rewrote the script to generate an integer temperature.

Sure enough, after making sure that the script was generating an integer and then restarting hobbit, it fixed the problem.

Retrieved from "https://finninday.net/wiki/index.php?title=Xymon_custom_graph_config&oldid=3639"