Xymon custom graph config

collect the data with a script

hobbit server:/usr/lib/hobbit/client/ext/cputemp:

#!/bin/sh

#/usr/bin/sensors -f | grep "CPU Temp" | awk '{print $1 $2 $3}' |
#	awk {'sub("\+", ""); sub("°F", ""); print }' > /tmp/cputemp.txt
#/usr/bin/sensors -f | grep -i temp | grep -v k8temp| awk '{ sub("°F", ""); sub("\+", ""); sub("/", ""); sub(" +", ""); sub("\(.*$", ""); print}' > /tmp/cputemp.txt

RAWTEMP=`nvidia-smi -a | grep Temperature | sed -e "s/.*.://g" -e "s/C//g"`
FGPUTEMP=$((${RAWTEMP:-0}*9/5+32))
echo "temp1:$FGPUTEMP" > /tmp/cputemp.txt

/usr/bin/sensors -f | grep Temp | grep -v k8temp | awk '{sub(".F.*$",
""); sub(" +",""); sub("+",""); print}' >> /tmp/cputemp.txt

RESULT=`grep Core0Temp /tmp/cputemp.txt | awk '{ FS=":";  print int($2) }'`;
COLOR=green
if test "$RESULT" -gt 120
then
	COLOR=red
fi
if test "$RESULT" -lt 70
then
	COLOR=red
fi

$BB $BBDISP "status $MACHINE.cputemp $COLOR `date`

`cat /tmp/cputemp.txt`
"

exit 0

• you can run the script from the command line to test it

This is the expected output:

root@merkli:/usr/lib/hobbit/client/ext# ./cputemp 
./cputemp: 24: status .cputemp green Thu Jul 21 10:23:23 PDT 2011

temp1:95.0
Core0Temp: 
Core1Temp: 
: not found

This particular script creates a temp file, so you can look at the timestamp on that to see if it is running:

root@merkli:/usr/lib/hobbit/client/ext# ls -l /tmp/cputemp.txt 
-rw-r--r-- 1 hobbit hobbit 35 2011-07-21 10:26 /tmp/cputemp.txt

root@merkli:/usr/lib/hobbit/client/ext# cat /tmp/cputemp.txt 
temp1:95.0
Core0Temp: 
Core1Temp: 

launch the script with hobbit

hobbit server:/usr/lib/hobbit/server/etc/hobbitlaunch.cfg:

[cputemp]
    ENVFILE /usr/lib/hobbit/client/etc/hobbitclient.cfg
    CMD /usr/lib/hobbit/client/ext/cputemp
    INTERVAL 5m

hobbit client:/usr/lib/hobbit/client/etc/hobbitlaunch.cfg

• wait for five minutes and then you should see the data in the web interface, but not the graph

collect the data in an RRD

From here on out, the configuration should all be on the server and not the client, since the RRD is stored on the server and the graphs are generated from that.

hobbit server:/usr/lib/hobbit/server/etc/hobbitserver.cfg

TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,cputemp=ncv,heater=ncv"

NCV_cputemp="temp1:GAUGE,Core0Temp:GAUGE,Core1Temp:GAUGE"

• restart hobbit after making these changes

• you can verify the RRD:

hobbit server:/var/lib/hobbit/rrd/localhost/cputemp.rrd

root@weasel:/var/lib/hobbit/rrd/localhost# rrdtool info ./cputemp.rrd 
filename = "./cputemp.rrd"
rrd_version = "0003"
step = 300
last_update = 1311266629
header_size = 2320
ds[temp1].index = 0
ds[temp1].type = "GAUGE"
ds[temp1].minimal_heartbeat = 600
ds[temp1].min = NaN
ds[temp1].max = NaN
ds[temp1].last_ds = "131"
ds[temp1].value = 2.9999000000e+04
ds[temp1].unknown_sec = 0

root@weasel:/var/lib/hobbit/rrd/localhost# ls -lt cputemp.rrd 
-rw-r--r-- 1 hobbit hobbit 57616 2011-07-21 09:43 cputemp.rrd

The timestamp on the file should be less than 5 minutes old and the data inside should correspond to the output of the script.

create a graph definition

hobbit server:/usr/lib/hobbit/server/etc/hobbitgraph.cfg:

[cputemp]
    TITLE CPU Temperature
    YAXIS Degrees Fahrenheit
    DEF:temp1=cputemp.rrd:temp1:AVERAGE
    DEF:Core0Temp=cputemp.rrd:Core0Temp:AVERAGE
    DEF:Core1Temp=cputemp.rrd:Core1Temp:AVERAGE
    LINE2:temp1#@COLOR@:temp1
    LINE2:Core0Temp#@COLOR@:Core0Temp
    LINE2:Core1Temp#@COLOR@:Core1Temp\n

troubleshooting

If a graph is not appearing, you can view source on the page with the missing graph and click on the IMG link that it is trying to display. But often that won't reveal anything useful.

manually run hobbitgraph.sh with the parameters from the web page to see what the error is.

"/hobbit-cgi/hobbitgraph.sh?host=merkli&service=ncv:cputemp&graph_width=576&graph_height=120&disp=merkli&nostale&color=green&graph_start=1311105181&graph_end=1311277981&graph=hourly&action=view"